Inductive Encoder Solutions for Rotary Tables and Precision Rotary Stages
INDUCTIVE ABSOLUTE ENCODERS
Inductive Encoder Solutions
for Rotary Tables and
Precision Rotary Stages
Absolute angle feedback for direct-drive rotary tables and precision rotary stages. Compare the INEM models by ring dimensions, measurement performance and controller interface.

ROTARY AXIS FEEDBACK
Absolute position, built around your axis
The INEM series uses a stationary stator and a rotating code ring to measure single-turn absolute position. Its hollow-bore format is designed for direct integration around rotary tables and precision stages.

HOW TO SELECT
Start with fit, performance and interface
Use the dimensional table and your controller requirements to shortlist a model. Confirm the final configuration against the latest mechanical drawing and protocol documentation.
Mechanical envelope
Compare stator and rotor inner diameter, outer diameter and thickness with the available space on the axis. Check clearances and mounting features on the drawing.
Position performance
The supplied specification lists 23-bit resolution, +/-5 arcsec absolute accuracy and +/-1 arcsec repeatability. Match the required value to your application conditions.
Controller connection
Select RS485, BiSS-C or SSI to match the drive or controller. Confirm protocol variant, wiring and supply requirements before ordering.
MODEL RANGE
INEM models and dimensions
Dimensions are shown as inner diameter / outer diameter. The stator and rotor are separate components.
| Model | Stator ID / OD | Stator thickness | Rotor ID / OD | Rotor thickness | Turns | Resolution |
|---|---|---|---|---|---|---|
| INEM-035 | 44.8 / 90 mm | 4.5 mm | 35 / 80.2 mm | 4.1 mm | Single-turn | 23-bit |
| INEM-036 | 51 / 106 mm | 5.5 mm | 36 / 90 mm | 7.1 mm | Single-turn | 23-bit |
| INEM-058 | 72 / 128 mm | 5.5 mm | 58.75 / 113 mm | 7.1 mm | Single-turn | 23-bit |



Check the mechanical drawing for mounting details, tolerances and the complete envelope before releasing your design.
TECHNICAL DATA
Specifications for selection
Values below are transcribed from the supplied product parameter sheet. Confirm the selected variant and test conditions with OTV Sensing.
| Absolute accuracy | +/-5 arcsec | Repeatability | +/-1 arcsec |
|---|---|---|---|
| Resolution | 23-bit | Turns | Single-turn |
| Output interfaces | RS485 / BiSS-C / SSI | Supply voltage | 5 VDC +/-5% |
| Current consumption | 200 mA max | Recommended air gap | 0.4 mm +/-0.05 mm |
| Operating temperature | -40 to +85 deg C | Storage temperature | -50 to +125 deg C |
| Shock resistance | 980 m/s^2, 6 ms | EMC reference | Confirm the applicable standard designation and test report |
| Vibration endurance | 10-55 Hz at 1.5 mm amplitude; 55-2000 Hz at 98 m/s^2. Powered sample, X/Y/Z axes for 2 hours per axis (6 hours total). | ||
The EMC reference in the supplied sheet is incomplete. Request the current compliance documentation for the exact encoder configuration.
INTEGRATION
Plan the installation around the specified air gap
The recommended air gap is 0.4 mm +/-0.05 mm. The supplier sheet describes LED status indication for installation. Follow the installation instructions and confirm alignment, mounting and operating limits for your assembly.
- Check stator and rotor dimensions against the axis drawing.
- Verify the air gap and mounting method.
- Match supply and communication protocol to the controller.

APPLICATIONS
For precision rotary motion
CNC machine tools
Rotary axes in four- and five-axis machining centers. Check required accuracy, interface and machine vibration conditions.
Semiconductor equipment
Rotary stages for wafer handling, inspection and assembly. Match the measurement and environmental specifications to the axis.
Aerospace and test platforms
Rotary platforms and test equipment where single-turn absolute feedback and a hollow-bore format fit the design.
Precision rotary stages
Metrology and automation systems requiring compact absolute angle measurement. Confirm project qualification needs separately.
ENGINEERING SUPPORT
Have an axis drawing or a non-standard requirement?
Send the mechanical envelope, accuracy target, interface and operating conditions for a configuration review.
